MM-80 is a 100% solids, two-component, heavy-duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in-floor joint protection.
MM-80 is available in two versions; MM-80 with the original 5:1 ratio, used primarily for manual dispensing, and MM-80P, with a 1:1 mix ratio, intended for use in dual-component mechanized pumps.
MM-80 was developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges. MM-80 is designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F (49˚C). It is also ideal for joint and cracks repair.
Support your foot traffic with a solid surface by using the Metzger McGuire MM-80 filler. Packaged in 1-gallon quantities.
Refer to the MSDS sheet for correct handling directions, specifications, and warnings.
**This is a Hazardous Material and can ONLY be shipped Ground.**
**ALL COLORS but Standard Gray must be ordered in quantities of FOUR!**
**Due to unforeseen circumstances with the shortage of raw materials, there is currently a 35% surcharge on this product.