Description
100% solids, semi-rigid epoxy control joint filler
SpecPoxy C.J. is a two-component, semi-rigid epoxy designed for filling control and construction joints in industrial concrete floors. It supports joint edges, reducing spalling caused by wheel traffic and complies with ACI 302, section 4.10 recommendations for epoxy joint fillers.
Applications:
- Filling control and construction joints.
- Repair of damaged or spalled joint nosing and cracks.
- Easy 1 to 1 mix ratio and pourable gray consistency.
- High elongation to resist tearing due to excessive movement.
- Moisture insensitive to cure in damp environments.
- Semi-rigid flexibility, not welding slabs together or becoming brittle with age.
- Optimum hardness to transfer wheel loads while allowing moderate movement.
Application
- SpecPoxy C.J. can be poured, applied with a bulk caulking gun, or pumped from a dual component pump.
- Overfill the joint, and once tack-free, grind or cut flush to the surface of the concrete.
- If not fully cured, a heat flame may facilitate cutting.
