Metzger McGuire Armor-Hard Epoxy Liquid Concrete Crack Repair will repair your concrete floor for industrial-type traffic. This EXTREME epoxy is meant to withstand the beating of industrial equipment and constant pounding. It is composed of two-component, 100% solids epoxy system designed for ambient to cool temperature applications. There are two Armor-Hard Extreme primary versions with to choice from; Armor-Hard Extreme which is a liquid and Armor-Hard Extreme Epoxy Kit with Aggregate, which is an all-inclusive kit. Armor-Hard EXTREME Liquid or Kit – quick set properties, multiple temperature applications. Armor-Hard EXTREME Liquid or Kit – early set properties (faster than standard structural epoxies, slower than EXTREME), use limited to temperatures of 50F+. As a mortar – large spall repair/rebuilding of joint shoulders, as a topping for de-laminated slabs, filling in holes, potholes, gouges, ruts, pop-outs. Also, as a liquid or to fill wider random cracks. Limitations: Should not be used in active or moving joints unless a relief joint is formed or saw cut. For deep repairs at warm temps. Install in maximum 1″ layers to avoid shrinkage due to exotherm. Should be installed at 20F (-7C) or higher. Advantages: Quickset allows for foot traffic in 1 hour, normal traffic in 2 hours, superior wear and impact resistance, wider application range than most structural epoxies, from +120F (49C) down to 20F (-7C), low odor, 100% solids and USDA/FDA/LEED acceptable. Color: Epoxy liquid color is translucent/clear. If blended with aggregate, the mortar color will become aggregate color. See the label for specific directions, specifications, and warnings. Refer to the MSDS sheet for correct handling directions, specifications, and warnings.
**This is a Hazardous Material and can ONLY be shipped Ground.**
**Due to unforeseen circumstances with the shortage of raw materials, there is currently a 35% surcharge on all Metzger material.