Metzger/McGuire Armor-Hard Concrete Epoxy Kit with Aggregate

Clear
SKU: MMAHK-D Category: Tags: ,

Description

Armor-Hard is a 100% solids, two-component structural epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Kit comes with a specially engineered aggregate blend designed for easy troweling/finishing.

Typical Use:

  • As a mortar, it can do spall repairs/rebuilding of joint shoulders, as a topping for delaminated slabs, fill in holes, gouges, ruts, pop-outs, and repair broken slab panel corners.
  • As a liquid, it fills wider random cracks and bonds concrete to itself.
  • Color of the blended epoxy is translucent/clear, but mortar color will be the color of the aggregate used.

Limitations: DO NOT use in joints or cracks that move, as a surface coating, and for deep repairs install in max 1″ (25 mm) deep layers to avoid shrinkage due to exotherm. It should be installed at or higher than 50F (10C).

Advantages:

  • Pedestrian/construction traffic in 3-4 hours
  • Grinding/sanding in 3-4 hours
  • Hard-wheeled traffic in 8 hours or less
  • At 70F it does not require a separate primer
  • USDA/FDA acceptable
  • Superior impact, abrasion and chemical resistance
  • Very low odor.

See the label for specific directions, specifications, and warnings.

This is a Hazardous Material and can ONLY be shipped Ground.
Refer to the MSDS sheet for correct handling directions, specifications, and warnings.

 
 
 

Additional information

Weight 50 lbs
Size:

5-Gallon Kit

Color:

Dovetail Gray, Natural, Standard Gray

Subcategory

,

Spec Sheets

Data / Specs:
Armor Hard Kit Technical Data Sheet
Armor-Hard Liquid Tech Data Sheet.pdf
Armor-Hard Part A SDS .pdf
Armor-Hard Part B SDS.pdf
Armor-Hard Part C SDS.pdf

Install Instructions:
Armor Hard Kit Install Instructions
Armor-Hard Liquid Install.pdf