L&M Aquapel Plus

$235.86

SKU: 8-28-553-1218 Category:

Description

AQUAPEL is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior, above grade, traffic bearing concrete. AQUAPEL penetrates concrete surfaces and chemically bonds directly with the substrate which results in a surface that is highly resistant to the attacks of both moisture and salt.

AQUAPEL’s unique, odorless, very low VOC formulation offers permanent, non-yellowing protection. AQUAPEL’s accelerated chemical reaction with the natural minerals in the substrate produces a stable and predictable hydrophobic surface within seven days after application.

AQUAPEL is available in two concentrations. Regular AQUAPEL is ideal for normal duty, cast-in-place concrete with moderate exposure to salt and/or water. High solids AQUAPEL PLUS is for increased long-term protection on porous concrete, elevated structural traffic bearing concrete slabs, and on normal concrete with severe exposure to salt and water.

Basic Use: AQUAPEL offers positive salt screening in northern, southern climates. AQUAPEL’s non-flammable, non-volatile formula minimizes corrosion of reinforcing steel and protects concrete from the damaging effects of deicer chemicals, road salts, and other chemicals. AQUAPEL’s successful field and lab performance make it ideal for walkways, stairs, outside malls, building entrances, parking decks, garages, driveways, piers, bus and truck terminals, precast and prestress concrete. Other uses include architectural concrete, concrete and brick pavers, and exposed aggregate surfaces.

Product sold in quantities of 5 gallons!

Additional information

Weight 50 lbs
Subcategory

,

Type

,

Coverage Calculator

 

L&M SEALER CALCULATOR

L&M SEALER CALCULATOR

This calculator estimates the amount of sealer required (in gallons) for a given area.

SQ FT
PRODUCT *
GAL REQUIRED
FOR ESTIMATING PURPOSES ONLY. Variations in concrete quality, porosity, job site conditions, temperature and relative humidity will affect coverage rates. ALWAYS TEST representative areas to confirm suitability, accurate coverage rates and desired results.

Spec Sheets

Features & Benefits:

  • Formulated to stop moisture and salt penetration.
  • Odorless/VOC compliant formulation.
  • Ready-to-use, non-flammable, non-volatile, waterborne formulation.
  • Environmentally safe.
  • Invisible, non-darkening.
  • No Film. Leaves surfaces breathable.

Data/Specs:
Aquapel Data Sheet.pdf
Aquapel Water Repellents Section 07 19 00.pdf
Aquapel Comparison Guide.pdf