CTS Rapid Set TXP TRU Epoxy Concrete Primer

$350.00

Compare
SKU: 183040000 Category:

Description

Prime your concrete for the most porous floor with CTS Rapid Set TXP TRU Epoxy Concrete Primer.

When you need a high performance epoxy primer for use with your finished TRU Self Leveling flooring applications, use Rapid Set TXP (TRU Epoxy Primer). This two-component, low VOC, moisture- and alkali-insensitive epoxy primer is recommended for most wear topping and decorative system installations. You can use TXP on moist substrates or five-day-old “green” concrete. Seal porous concrete with TXP to prevent pinholes and install floors quickly. Place moisture-insensitive flooring such as TRU Self Leveling in as little as 12 hours. With one-coat application, TXP is easy to use and offers high bond strength.

When applied at 12 mils (0.3mm) thickness, the adhesion of TXP and TRU Self Leveling will remain unaffected by moisture vapor transmission (MVT) and alkalinity up to pH of 14. Comply with subsequent manufacturer’s testing and installation requirements when their products are used in conjunction with TRU Self Leveling as part of an installed floor system.

This is a Hazardous Material and can ONLY be shipped Ground.

Refer to the SDS sheet for correct handling directions, specifications, and warnings.

Additional information

Weight 50 lbs
Dimensions 13 × 13 × 16 in
Subcategory

Type

Spec Sheets

Specifications:

  • Hazardous Material
  • Interior/exterior usage
  • Only needs one application
  • Moisture and Alkali Insensitive
  • Covers 133 square feet per gallon

Data/Specs:
TXP TDS.pdf
TXP SDS Part A.pdf
TXP SDS Part B.pdf

0