1.5 CU FT Soda Storm Abrasive Blast Pot

$5,220.80

Compare
SKU: 999-8040010PB Category:

Description

This portable, abrasive blast pot sandblasting machine is 1.5 cubic feet. It features 150 PSI, a pressure release system, soda storm technology and pneumatic operation. This sandblaster includes APV II with multi-ported sleeve (stainless steel), auto air valve, 1″ piping with moisture separator, lid, fine mesh screen, a 55′ twinline hose assembly and a control handle. This sandblaster also features a 1″ (50′) ergo flex blast hose with couplings and tungsten carbide water induction nozzle system. / Soda Storm Blasters will operate throughout the range of the regulator down to 5 PSI. Do not exceed 125 PSI when using the blast hose with a nylon nozzle holder or couplings. This sodablaster includes 100-lbs of free natrium soda blast 260 media.

Additional information

Weight 329.337 lbs
Subcategory

Type

Spec Sheets

Features and Benefits:

  • 1.5 cu ft capacity (43 liters)
    • 150 PSI vessel (10.3 bar)
    • A.S.M.E. section VIII division 1
    • C.R.N. for all provinces
  • Pressure Hold System
    • Reduces abrasion consumption
    • Reduces moisture problems
    • Smoother starts and stops
  • Moisture Separator with Element
    • Filter out contaminants down to 50 micron
  • 1" Galvanized Piping for Corrosion Resistance
  • Heavy-Duty Full Port Ball Valves
  • Extended Life Schedule 80 Heavy-Duty Nipple
    • Withstands abrasive wear for longer life
  • Bolt Clamps on Pusher Line Make Field Repairs Easier
  • Normally Closed Valves
    • Automatic plunger valve II (APVII) premium abrasive metering valve with quadruple plunger seal arrangement solves the air and abrasive carry over problem as well as the plunger and seal jamming problem normally associated with regulated low pressure blasting applications and/or the use of steel abrasive, multi-ported sleeve allows for up to 4 different fixed orifices to control abrasive flow to your desired (lb/min) rate, solid machined tungsten carbide plunger and sleeve for use with hard abrasive applications, provides far superior wear rates and 100% consistent tolerances, 1" cleanout ball valve assembly allows for a quick and easy way to pump out and switch to another abrasive
    • Auto air valve for fast starts and stops
    • Heavy-duty filtered control valve reduces stopping time when control handle is released
  • Sanitary cleanout coupling provides easy access to obstructions that may be bridging over the metering port
  • Abrasive flow assist vibrator with controls
  • Pressure regulator (10-150 PSIG) with liquid filled gauge
  • Differential pressure gate valve with liquid filled gauge provides you with precision control of your abrasive flow rate (lb/min)
  • Blow-down muffler reduces unnecessary loud noise
  • Blast hose and coupling
    • 50-ft ergo flex blast hose with nylon couplings is ergonomically friendly and helps eliminate operator fatigue
  • Patented water induction nozzle system (WIN)
    • Minimum water consumption, 3/4 to 6 quarts per minute
    • Dual-operation as a dry or wet blast nozzle
    • Tungsten carbide lined for long life
  • Soda Storm Standard Accessories
    • Lid keeps rain water and contaminants out of the pot
    • Fine mesh screen keeps contaminants like paper from the bags of abrasive from entering the vessel
  • Made in the USA
0